Service graphs

daily graph weekly graph
monthly graph yearly graph

Graph Information

This graph shows the value of all S.M.A.R.T attributes of /c0/s8/s0 (Model: WDC WD3000FYYZ-01UL1B1, Serial: WD-WCC132150177, WWN: 0 000000 000000000). smartctl_exit_status is the return value of smartctl. A non-zero return value indicates an error, a potential error, or a fault on the drive.

Note: This service is in WARNING state because one of the values reported is outside the allowed range. Please see further down for information about the ranges and the graph for the values.

Field Internal name Type Warn Crit Info
Airflow_Temperature_Cel Airflow_Temperature_Cel gauge   000:   
Calibration_Retry_Count Calibration_Retry_Count gauge   051:   
Command_Timeout Command_Timeout gauge   000:   
Current_Pending_Sector Current_Pending_Sector gauge   000:   
End_to_End_Error End_to_End_Error gauge   097:   
Hardware_ECC_Recovered Hardware_ECC_Recovered gauge   000:   
Load_Cycle_Count Load_Cycle_Count gauge   000:   
Multi_Zone_Error_Rate Multi_Zone_Error_Rate gauge   051:   
Offline_Uncorrectable Offline_Uncorrectable gauge   000:   
Power_Cycle_Count Power_Cycle_Count gauge   000:   
Power_Off_Retract_Count Power_Off_Retract_Count gauge   000:   
Power_On_Hours Power_On_Hours gauge   000:   
Raw_Read_Error_Rate Raw_Read_Error_Rate gauge   051:   
Reallocated_Event_Count Reallocated_Event_Count gauge   000:   
Reallocated_Sector_Ct Reallocated_Sector_Ct gauge   140:   
Reported_Uncorrect Reported_Uncorrect gauge   000:   
Seek_Error_Rate Seek_Error_Rate gauge   051:   
Spin_Retry_Count Spin_Retry_Count gauge   051:   
Spin_Up_Time Spin_Up_Time gauge   021:   
Start_Stop_Count Start_Stop_Count gauge   000:   
Temperature_Celsius Temperature_Celsius gauge   000:   
UDMA_CRC_Error_Count UDMA_CRC_Error_Count gauge   000:   
smartctl_exit_status smartctl_exit_status gauge
1